Roots Blower for Aquaculture structure display

1. Motor
2. Motor junction box
3. Imported silencer
4. Impeller housing
5. Pressure relief valve
6. Pressure gauge
7. Flexible connector
8. Outlet silencer
9. Metal mounting base
High-pressure
Large airflow
Easy to maintain
Durable
Aquaculture Roots Blower Model Selection
| Model | Power | Air flow | Air pressure | Nano aeration tube | Nano aeration disc | Outlet size |
|---|---|---|---|---|---|---|
| R15T50 | 1500W/2HP | 1.4m3/M | 35KPA | 100m | 35pieces | 50mm |
| R22T50 | 2200W/3HP | 1.8m3/M | 35KPA | 150m | 50pieces | 50mm |
| R30T50 | 3000W/4HP | 1.8m3/M | 55KPA | 150m | 50pieces | 50mm |
| R30T65 | 3000W/4HP | 2.5m3/M | 40KPA | 210m | 70pieces | 65mm |
| R40T65 | 4000W/5.4HP | 2.5m3/M | 55KPA | 210m | 70pieces | 65mm |
| R40T80 | 4000W/5.4HP | 4.3m3/M | 35KPA | 350m | 115pieces | 80mm |
| R55T80 | 5500W/7.9HP | 4.5m3/M | 45KPA | 370m | 125pieces | 80mm |
| R55T100 | 5500W/7.9HP | 5.1m3/M | 35KPA | 420m | 140pieces | 100mm |
| R75T80 | 7500W/10HP | 4.1m3/M | 65KPA | 330m | 110pieces | 80mm |
| R75T100 | 7500W/10HP | 7m3/M | 35KPA | 580m | 195pieces | 100mm |
| R75T125 | 7500W/10HP | 9m3/M | 35KPA | 750m | 250pieces | 125mm |
| R110T100 | 11000W/14.5HP | 6.8m3/M | 60KPA | 550m | 185pieces | 100mm |
| R110T125 | 11000W/14.5HP | 11m3/M | 35KPA | 950m | 320pieces | 125mm |
| R110T150 | 11000W/14.5HP | 12m3/M | 35KPA | 1050m | 350pieces | 150mm |
| R150T125 | 15000W/20HP | 10.1m3/M | 50KPA | 850m | 290pieces | 125mm |
| R150T150 | 15000W/20HP | 15m3/M | 35KPA | 1300m | 440pieces | 150mm |
Important Notes on Choosing an Aquaculture Roots Blower ⚠️:
- All models can be selected as inverter types. Inverter types include an additional inverter to save power.
- Voltage can be customized: 110V/220V/380V/440V
Basic operating principle of the aquaculture roots blower

1. Three-bladed impeller 2. Air inlet 3. Air outlet
- The fan casing contains two sets of three-bladed impellers, driven by a pair of synchronous gears to reciprocate in opposite directions.
- The air inlet, due to the impeller rotation, creates a low-pressure volume V1, simultaneously drawing in air to a volume V2. The increased resistance at the air outlet generates high-pressure gas, thus expelling air.
- There are gaps between the impellers and between the impellers and the casing; there is no direct friction between these three components, allowing for long-term operation.
Why choose our regenerative blower for aquaculture?





How to install Roots Blower for Aquaculture
During installation, pay special attention to the following points.

Wiring method of frequency converter

Wiring method for motor and motor fan

Motor junction box

Lubricating oil filling point

Lubricating oil observation window

Pressure relief valve and pressure gauge

Flexible connection and one-way valve

Air outlet silencer
Aeration accessories that can be used with roots blower for aquaculture

Nano Air Diffuser

Water Pusher

Nano-aeration Tubes

Airflow Distributor
How to choose the right auqaculture roots blower for you?

Feel free to contact us. Our engineers will help you choose the right root blower model and aeration accessories based on your aquaculture project.
Request Our Latest PriceRoots blower for aquaculture FAQ
- Roots blowers are very durable, but rain protection is necessary.
- This is similar to most electrical appliances.
- Therefore, if used outdoors, you might consider building a separate equipment room, or at least a rain shelter.
- Noise levels vary depending on the model. Even for the same model, noise levels can differ under different operating conditions. A 4kW model will still produce 75 decibels of noise from 1 meter away.
- However, this is a heavy-duty blower. If your farm is located close to residential areas, we recommend building a separate soundproof room.
We have a complete set of installation videos. If you need further assistance, please contact us.
Our after-sales team can provide online guidance.
- Roots blowers are heavy equipment, so we generally ship them by sea.
- Door-to-door service is also available.
Consumable parts are typically belts and sound-absorbing cotton.
We will include some extra with the shipment. If you require replacement parts during use, we can provide them at cost price and choose a suitable shipping method.
Other types of aquaculture blowers recommended



















